Back-of-tooth Radius
    The radius on the back of the tooth in the chip space/gullet.

Broach
    A cutting tool in various shapes, equipped with a series of cutting teeth.

Burnishing Button
    Broach tooth without a cutting edge. A series of buttons is sometimes placed after the cutting teeth of a broach, to produce a smooth surface by material compression.

Chipbreaker
    Notches in the teeth of broaches which breaks up chips, facilitating their removal. On round broaches they prevent the formation of a solid ring in the chip gullet.

Chip Load
    The amount of thickness, length and width / circumference of a chip.

Chip Space
    Space between broach teeth which accommodates chips during cut. Sometimes called the "chip gullet," it includes the face angle, face angle radius, and back-of-tooth radius.

External Broach
    A broach which cuts on the external surface of the workpiece.

Face Angle
    Angle of the cutting edge of a broach tooth. Sometimes called the "hook" angle forms one part of the cutting edge.

Face Angle Radius
    The radius just below the cutting edge that blends into the back of tooth radius.

Finishing Teeth
    Teeth at the end of broach arranged at a constant size for finishing the surface.

Front Pilot
    The guiding portion of a broach (usually internal) which serves as a safety check to prevent overloading of the first roughing tooth and correct axial alignment.

Gullet
    Name sometimes applied to "chip space."

Gullet Depth
    Height of tooth or broach gullet from root to cutting edge.

Hook Angle
    Name sometimes applied to "face angle" of tooth.

Internal Broach
    Broach which is pulled or pushed through a hole in the workpiece to bring the hole to desired size and shape.

Land
    Thickness of the top of the broach tooth.

Land, Straight
    A land having no back-off angle, and used for finishing teeth to retain broach size after a series of sharpenings.

Length to First Tooth
    The sum of pilot and pull shank length.

Overall Length
    Total length of a broach.

Pitch
    Measurement from the cutting edge of one tooth to the corresponding point on the next tooth.

Pull Broach
    Broach that is pulled through or over the face of the workpiece.

Pull End
    That end of the broach at which it is coupled to the puller of the broaching machine.

Push Broach
    A broach that is pushed through or over the surface of the workpiece.

Rear Pilot
    Maintains tool alignment as the final finishing teeth pass through the workpiece hole. The rear pilot is slightly smaller diameter than the finishing teeth.

Rise per Tooth
    Progressive increase in tooth height from tooth-to-tooth of a broach. Usually greater in roughing teeth than in semifinishing teeth. Action of step height produces the equivalent of feed in other types of machining. Twice the chip per tooth for round broaches.

Roughing Teeth
    The teeth which take the first cuts in any broaching operation. Generally they take heavier cuts than the semifinishing teeth.

Semifinishing Teeth
    Broach teeth, just ahead of the finishing teeth, which take the semifinishing cut.

Shear Angle
    The angle between the cutting edge of a shear tooth and a line perpendicular to the broach axis or line of travel on surface broaches.

Shear Cutting Tooth
    Tooth positioned at a sheer angle to the direction of broach motion. Used on surface or external broaches, and cuts with a shear action, with maximum tooth overlap.

Surface Broach
    An external broach which cuts a flat or contoured surface.